Mopar Performance - DODGE TRUCK MAGNUM/JEEP ENGINE PARTS


	ENGINES AND BLOCK HARDWARE A. Magnum 5.9L MPI 360 Short Block Assembly This Magnum 5.9L MPI 360 Short Block Engine Assembly features a remanufactured block, along with crankshaft and connecting rods. Mopar recommends the use of a Magnum R/T Cast Iron Cylinder Head or the Aluminum Magnum Cylinder Head. Speciﬁcations: • Blocks are bored 0.020" oversize • Slightly shorter deck assures smooth gasket surface • New Engine Bearings • New Hydraulic Camshaft (requires new tappets; not included) • Properly clearanced Crankshaft and Connecting Rods • New Aluminum Pistons and Moly Piston Rrings • New Timing Gears and Chain • Balanced to use all production Magnum 5.9L components • Recommended as a direct replacement Magnum V8 Short Block for 1993 and newer trucks and Jeep® vehicles P5007549 Magnum 5.9L MPI 360 Short Block Assembly Note: Crate engines that change the emissions performance of the vehicle may not be legal for use on vehicles regulated for highway use in California and other states. Horsepower and torque rating based on test engine. Ratings may vary on individual engines. B. Engine Teardown Gasket Sets* Includes all gaskets needed for complete engine teardown. Includes oil pan, cylinder head, valve cover, timing chain cover, intake manifold, exhaust and oil pump gaskets. P4876249 Engine Teardown Gasket Set (5.9L Truck Magnum/Jeep Engines) P4876248 Engine Teardown Gasket Set (5.2L Truck Magnum/Jeep Engines) P4529245 Engine Teardown Gasket Set (4.0L Jeep Engines) C. Front Cover Gasket P4876052 Front Cover Gasket (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) CRANKSHAFTS D. Cast Crankshafts These heavy-duty surface hardened, forged Magnum Engines Cranks feature radiused ﬁllets at main and rod journals. Requires balancing. Also features 6-bolt pattern on crank ﬂange. P5007259 Cast Crankshaft-3.58" Stroke (360 Main Small Block, 5.9L Truck Magnum/Jeep Engines) P5007258 Cast Crankshaft-4.00" Stroke (360 Main Small Block, 5.9L Truck Magnum/Jeep Engines) Note: 4.00" stroke cranks require clearancing on block and the use of custom pistons.

ROLLER TIMING CHAIN AND SPROCKETS A. Timing Chain Tensioner This Timing Chain Tensioner stabilizes cam timing by reducing timing chain slack. It can be used instead of Thrust Plate P5249637. P5007709 Timing Chain Tensioner (Small Block and 3.9L, 5.2L, 5.9L Truck Magnum/Jeep® Engines) B. Double Roller Chain and Sprocket Sets These high-strength Double Roller Chain and Sprocket Sets provide added durability and decreased rotational friction compared to the production silent chains. Sets include magna-ﬂuxed sprockets and roller timing chain. P5249267 Double Roller Chain and Sprocket Set — 1-Bolt, 3 Matched Keyways (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) P5249519 Double Roller Chain and Sprocket Set- 1-Bolt Mount, 1 Keyway (2.5L/4.0L Jeep Engines) C. Flywheel Attaching Package This Flywheel Attaching Package from Mopar Performance contains all bolts required to attach the ﬂywheel and clutch to the engine assembly. Includes 6 ﬂywheel bolts, 6 clutch bolts, pilot bearing, and seal. P4529636AB Flywheel Attaching Package (4.0 AMC 360 MTX Jeep Engines) VIBRATION DAMPERS D. Thin Crank Vibration Damper This production-style Thin Crank Vibration Damper is designed for all production balanced Small Blocks. Not SFI approved. P5007187 Thin Crank Vibration Damper (5.9L Truck Magnum/ Jeep Engines, 5.9L Magnum Crate Engines) E. Production Replacement Vibration Damper Production Replacement Damper is compatible with production crank and piston rod weight. P5249535 Production Replacement Vibration Damper- V-Belt (4.2L Jeep Engines) F. Damper Attachment Package This package contains parts necessary to attach the vibration damper to the crankshaft. P4529677 Damper Attachment Package (2.5L/4.0L Jeep Engines) G. Damper Degree Timing Tape Improve timing accuracy with this Damper Degree Timing Tape. Marked in 90° increments. Self-adhesive strip adheres to the Crank Vibration Damper for clear identiﬁcation of marks. Permits initial total spark advance up to 60° instead of only 10°–15° as on chain case timing tab. P4529070AB Damper Degree Timing Tape Note: Damper not included.

A. Purple Shaft Camshafts Mopar Performance cams are designed and engineered exclusively for your engine. A wide range of proﬁles is available, from mild to wild, and bracket to all-out racing. All Mopar Performance cams are designed, developed, dyno’d, and track tested by engineers. These cams are developed for increased power and rpm potential while maintaining reliability and the best possible low-speed characteristics, including torque and idle quality. These Purple Shaft cams offer the best horsepower-to-dollar-spent value. Each cam package contains the cam, cam lube, instruction sheet and tappets. P5249549 Hydraulic Roller Camshaft (5.2L/5.9L Truck Magnum/Jeep® Engines) P5007551 Hydraulic Roller Camshaft (5.2L/5.9L Truck Magnum/Jeep Engines) P4529230AB Hydraulic Camshaft (4.0L Jeep Engines) P4529228AB Hydraulic Camshaft (4.0L Jeep Engines) *P4529229AB Hydraulic Camshaft (4.0L Jeep Engines)	B. Hydraulic Roller Tappets Sold as sets of 16 or individually for service. P5249862 Hydraulic Roller Tappets-Set of 16 (5.2L /5.9L Truck Magnum/Jeep Engines, Magnum Crate) P4876054 Hydraulic Roller Tappet-Sold Individually (5.2L/5.9L Truck Magnum/Jeep Engines) P4529220AB Hydraulic Roller Tappet-Sold Individually (2.5L/4.0L Jeep Engines) *P4876055 Tappet Aligning Yoke (5.2L/5.9L Truck Magnum/Jeep Engines)
	C. Offset Camshaft Key Set For centerlining your camshaft, these hardened keys are color coded in 1°, 2°, 3°, 4° and 5° increments. Production key is used for zero offset. P5249600 Offset Camshaft Key Set (3.7L, 3.9L, 4.7L, 5.2L, 5.9L Truck Magnum/Jeep Engines) Note: Color Code for Cam Keys: Natural=1˚, Red=2˚, Blue=3˚, Yellow=4˚, White=5˚. D. Pushrods* Mopar Performace Pushrods are sold as complete engine sets (16 for V8 engines; 12 for 6-cylinder engines). P4529675 Pushrods-Set of 12 (1987–89 4.0L Jeep Engines) P5249662 Hydraulic Roller Pushrods-6.92", Set of 16 (5.2L/5.9L Truck Magnum/Jeep Engines, Magnum Crate)

CYLINDER HEADS, GASKETS AND HARDWARE A. Aluminum Cylinder Head This Magnum engine Cylinder Head features: • Higher airﬂow and performance over the stock cast iron Magnum engine heads • 10-bolt production Valve Cover • 8 mm Valve Stems • Unique vertical style Intake Manifold attachment • Production valve gear, except for larger 3/8" studs • Machined for 1.92" Intake Valves and 1 5/8" Exhaust Valves • Designed with smaller 53 cc combustion chamber • Uses production exhaust ﬂange pattern • No heat crossover • Lighter weight than cast iron • Intake runner 177 cc P4876624 Aluminum Magnum Cylinder Head (5.2L/5.9L Truck Magnum/Jeep® Engines, Magnum Crate Engines) Note: Production guide plates must be drilled to 3/8". B. Magnum R/T Cast Iron Cylinder Heads These heads feature: • Unique all-new casting for Magnum V8 engines • Higher airﬂow and better performance than stock cast iron Magnum engine Cylinder Heads • 10-bolt Magnum engine production Valve Cover design • 8 mm Valve Stems • Vertical style Intake Manifold attachment • Production valve gear (i.e., Rocker Arms, Valves, Valve Springs, Keepers and Retainers) • Works with factory and Mopar Performance Magnum engines plus stock Intake Manifolds, Exhaust Manifolds and Valve Covers P5007145 Magnum R/T Cast Iron Head Assembly-1.92" Int./1.625" Ex. (5.2L/5.9L Truck Magnum/Jeep Engines) P5007140 Magnum R/T Cast Iron Head-1.92" Intake, 1 5/8" Exhaust (5.2L/5.9L Truck Magnum/Jeep Engines) P5007141 Magnum R/T Cast Iron Head-2.02" Intake, 1 5/8" Exhaust (5.2L/5.9L Truck Magnum/Jeep Engines)
	A. Cylinder Head Gaskets These Cylinder Head Gaskets can be used as replacements or for heavy-duty/competition applications. P4876048 Composition Material Gaskets-to 12.5:1, 0.040–0.042 Thick, Set of 2 (5.2/5.9L Truck Magnum/Jeep® Engines) P4529242 Cylinder Head Gasket-Sold Individually (4.0L Jeep Engines) B. Head Bolt Set Head Bolt Set includes all head bolts and washers as required. P4876759 Aluminum Commando Cylinder Head Bolt Set (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) C. Hardened Washer Sets Hardened Washer Sets for use with head bolts and main caps. They are sold in sets of 20. P4120456 Hardened Washer Set — 3/8" (426 Hemi®, Big Block, Small Block, Truck Magnum/Jeep Engines) P4120459 Hardened Washer Set-1/2" (426 Hemi, Big Block, Small Block, Truck Magnum/Jeep Engines) VALVE COVERS AND HARDWARE D. Polished Cast Aluminum Valve Cover Set Cast aluminum Magnum engine logo valve cover is high strength to be more rigid for better antileak properties. Set includes 20 screws and washer assemblies, all grommets and quarter-turn oil ﬁller cap. Gaskets must be ordered separately. P5007618 Polished Cast Aluminum Valve Cover Set (5.2L/5.9L Dodge Truck Magnum Engines) P5249660 Valve Cover Gaskets — 10-Bolt Mold Rubber, Steel Shim (5.2L/5.9L Truck Magnum/Jeep Engines) E. NEW! 5.7L Hemi Valve Cover Set These Valve Covers feature a ParmasterTM chrome ﬁnish. A perfect way to dress up any factory 5.7L Hemi engine. They will not discolor under heat. Set includes 2 valve covers, valve cover gaskets and spark plug seals. P4510845 PermasterTM Chrome Valve Covers (5.7L Hemi Crate Engine, Production 5.7L Engines) F. Black Wrinkle Cast Aluminum Valve Cover Sets Magnum Valve Covers feature the Mopar Pentastar logo, while Jeep Valve Covers feature the Jeep logo. Sets include 2 valve covers for 5.2L/5.9L engines; 1 for 4.2L engines. Sets include attaching screws, grommets, bafﬂe and oil ﬁller cap. Gaskets must be purchased separately. P5007617 Black Wrinkle Valve Cover Set (5.2L/5.9L Truck Magnum Engines) P5007619 Black Wrinkle Valve Cover Set (1993–98 5.2L/5.9L Jeep Engines) P4876388 Black Wrinkle Valve Cover (1981–86 4.2L Jeep Engines) P5249660 Valve Cover Gaskets- 10-Bolt Mold Rubber, Steel Shim (5.2L/5.9L Truck Magnum Engines) P5007854 Valve Cover Gasket (4.2L Jeep Engines)
A. Chrome Breather Caps Use to ﬁll extra valve cover holes in cast aluminum valve covers. P4529880 Twist-On Bottom Vented Breather Cap (Big Block, Small Block, 5.2L/5.9L Truck Magnum/Jeep® Engines) P4529881 Push-In Style Breather Cap (Big Block, Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) P4529882 Rubber Grommet-for Breather Cap P4529881 B. Bafﬂe and Screw Package* For cast aluminum valve covers only. P5007052 Bafﬂe and Screw Package (Big Block, Small Block, Dodge Truck Magnum/Jeep Engines) C. Cast Aluminum Valve Cover Chrome Bolt Set For cast aluminum valve covers only. Includes 20 bolts. P5007620 Cast Aluminum Valve Cover Bolt Set (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) D. Cast Aluminum Valve Cover Grommet Set Set includes 1 Grommet for PVC and for 1 breather. P5249642 Cast Aluminum Valve Cover Grommet Set (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) VALVES AND VALVE HARDWARE E. Valves These stainless Valves have swirl-polished underheads that have no ﬂat or ski jump areas. They feature a 8 mm stem and 1 square groove. P5249876 Exhaust Valve-1.625" Diameter, 4.93" Stem Length (3.9L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249875 Intake Valve-1.92" Diameter, 4.91" Stem (2.5L, 3.9L,4.0L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249877 Intake Valve-1.97" Diameter, 4.91" Stem (2.5L, 3.9L, 4.0L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249878 Intake Valve-2.02" Diameter, 4.91" Stem Length (3.9L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249880 Exhaust Valve-1.56" Diameter, 4.93" Stem Length (2.5L/4.0L Jeep Engines) P5249879 Exhaust Valve-1.50" Diameter, 4.93" Stem Length (2.5L/4.0L Jeep Engines) F. Valve Seals Made of high-temp Viton material, these Valve Seals feature a full or semi-umbrella shape for best dual-purpose use. Seals help prevent oil seepage down valve guides. Not recommended for use with dual Valve Springs. Sold in sets of 16. P5249661 Valve Seals-5/16" Stem Size, 0.530" Guide (426 Hemi, 5.2L/5.9L Truck Magnum/Jeep Engines) P4529240 Valve Seals-8 mm Stem Size (4.0L Jeep Engines) G. Valve Stem Lash Caps These Valve Stem Lash Caps are 0.080" thick. They are made of hardened steel for improved rocker tip durability. Larger area than stock valve tip to help spread the rocker loads. Sold in sets of 16. P4120626 Valve Stem Lash Caps-3/8" Stem (426 Hemi®, Big Block, Small Block, Truck Magnum/Jeep Engines) P4120635 Valve Stem Lash Caps-5/16" Stem (426 Hemi, Big Block, Small Block, Truck Magnum/Jeep Engines)
A. Valve Springs High-pressure Valve Springs can be used on exhaust and intake valves for all high-performance applications. They feature a shorter fully compressed height and allow for increased valve lift. Springs maintain spring load at higher rpms. A must for high-performance cams. Sold individually. P4529214 Valve Spring (1981–87 2.5L/4.0L Jeep® Engines) P4529215 Valve Spring (1988–02 2.5L/4.0L Jeep Engines) P5249464 Valve Spring (3.9L, 5.2L, 5.9L Dodge Truck Magnum/Jeep Engines) P4876062 Valve Spring (5.2L/5.9L Truck Magnum/ Jeep Engines)
B. Valve Spring Retainers Restore worn or damaged valve train components to factory speciﬁcations with these durable Valve Spring Retainers. Use with 8° locks. 8 mm valve stem diameter. Sold individually. P4529216 Steel Valve Spring Retainer (2.5L/4.0L Jeep Engines) P4529217 Steel Valve Spring Retainer (2.5L/4.0L Jeep Engines) *P4452032 Chrome Moly Valve Spring Retainer (2.2L/2.5L SOHC, Dodge Truck Magnum/Jeep Engines)
	C. Valve Keepers (Locks) These single groove style Valve Keepers are made from hardened steel material. They feature 8° angles, an 8 mm stem diameter, and can be used for restoration or performance applications. Sold as cylinder head sets of 16. P4529218 Valve Keepers-For Retainers P4529216–17 (5.2L/5.9L Truck Magnum/Jeep Engines, 2.5L/4.0L Jeep Engines) ROCKER ARMS AND HARDWARE D. Roller Rocker Arm Sets — Complete Engine These complete engine Roller Rocker Arm Sets for Magnum engines include 16 roller tip Rocker Arms, Pivots, Guides, and Pushrods. Rockers are die cast aluminum and are individually adjustable. Can be used as heavy-duty replacement with Hydraulic Cams, standard or high-performance. May interfere with production Magnum engine Valve Covers. P5007404 Roller Rocker Arm Set-1.7 Ratio (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) P5249800AB Roller Rocker Arm Set-Stock 1.6 Ratio (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) Note: High-ratio rockers will increase valve lift-use matching valve spring, and check piston to valve clearance.
A. Roller Rocker Arm Set — Single Cylinder This single cylinder Roller Rocker Arm Set for Jeep® vehicles includes 1 cylinder set of 2 rockers, 2 support stands, rocker shaft and screws. Extruded aluminum rockers, anodized blue. Can be used with hydraulic, mechanical or roller cams. Roller tip and center pivot bearing to reduce internal friction. Provides exact geometry and 1.6:1 ratio. Adjustable, oil through pushrod style. P4529885 Roller Rocker Arm Set-Single Cylinder (2.5L, 4.0L, and 4.2L Jeep Engines) Note: 2.5L and 4.0L engines require aftermarket spacer for valve cover clearance. B. Production Replacement Rocker Arm Set Single Cylinder Rocker Arm set consists of 2 rocker arms, 2 pivots, 2 attaching bolts and 1 guide. Designed for use with hydraulic cams only. Production 1.6 design ratio. P4876050 Rocker Arm Set-Single Cylinder (5.9L Magnum Engines, Magnum Crate Engines, not 4.7L) C. Rocker Arm Heavy-duty stamped rocker for use with hydraulic cams only. Can be used to service stock Jeep engines. Sold individually. P4529221 Rocker Arm (2.5L/4.0L Jeep Engines) D. Rocker Arm Pivot Package Larger 3/8" diameter (stock 5/16"). Requires attaching hole enlargement on cast iron heads, standard on aluminum Magnum engines. Set of 16. P4876514 Rocker Arm Pivot Package-3/8" (3.9L, 5.2L and 5.9L Magnum Engines) Note: Requires guide plate to be drilled with 3/8" hole. E. Rocker Arm Stud Kits Required with aluminum Magnum engine Cylinder Heads and Aluminum Roller Rocker Arms. *P5007645 Roller Rocker Stud Kit-3/8" Coarse Thread (5.2L/5.9L Truck Magnum/Jeep Engines) P4876963 Rocker Stud Kit-3/8" (Truck Magnum)
	INTAKE MANIFOLDS When it comes to Intake Manifolds for your engine, don’t settle for the “also rans." Insist on the real deal. Only Mopar Performance Intakes are designed and developed by Chrysler engineers for Chrysler engines using only original equipment speciﬁcations for power and performance. A. Aluminum Dual Plane Intake — 4-bbl This Aluminum 4-bbl Dual Plane Intake Manifold permits the user to convert from EFI to carburated. Power range is idle–5000 rpm. P5007381 Aluminum Dual Plane Intake-4-bbl Carb (5.2L/5.9L Truck Magnum/Jeep® Engines) B. Aluminum Single Plane Intake — 4-bbl* This Aluminum Single Plane Intake Manifold permits the user to convert from EFI to carburated. Power range is 3000–6500 rpm. Perfect for engine swaps! P5007380 Aluminum Single Plane Intake-4-bbl Carb (5.2L/5.9L Truck Magnum/Jeep Engines, Magnum Crate) Note: Single plane manifolds may cause hood clearance problems. Check clearance with carburetor and air cleaner installed. C. Aluminum Single Plane Intakes — MPI* These MPI Intake Manifolds can be used as a direct replacement for 5.2L and 5.9L production engines. They are designed to use production throttle body, injectors, fuel rail and other hardware from your stock intake. Available in EGR and non-EGR. P5007852 Aluminum Single Plane Intake — 2-bbl MPI w/o EGR (1998–03 5.2L/5.9L Truck Magnum/Jeep Engines) P5007398AB Aluminum Single Plane Intake — 2-bbl MPI w/EGR (1992–97 5.2L/5.9L Truck Magnum/Jeep Engines) P5007791 Aluminum Single Plane Intake — 2/4-bbl MPI, Left Linkage (5.2L/5.9L Magnum Engine Conversion) P5007790 Aluminum Single Plane Intake — 2/4-bbl MPI, Right Linkage (5.2L/5.9L Truck Magnum/Jeep Engines) P5007638 Intake Manifold Installation Kit (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) Note: P5007398AB and P5007852 allows use of A/C and all factory accessories. Replacement for stock. Each may require modiﬁcations in some applications. Requires installation kit P5007638. INTAKE MANIFOLD HARDWARE D. Intake Manifold Installation Kit This installation kit is needed to install the Magnum engine single plane 2-bbl MPI intake manifolds (P5007398AB and P5007852). Kit includes all the necessary bolts, hardware, spacers and wire. P5007638 Intake Manifold Installation Kit (5.2L/5.9L Truck Magnum/Jeep Engines) E. Intake Manifold Attaching Package Package of factory original nuts and bolts to attach intake manifold and exhaust manifolds. Includes 5 bolts, 7 washers, 4 studs, 2 pins, 2 spacers, and 3 plugs for Jeep engines. P4529680 Intake Manifold Attaching Package (1987–89 4.0L Jeep Engines)
A. Intake Manifold Gasket Set Custom ﬁt Intake Manifold Gasket for use with Mopar Performance Magnum engine Cylinder Heads. Kits come complete to service 1 engine set (includes gaskets, end seals, o-rings and distributor seal where applicable). P4876049 Intake Manifold Gasket Set (5.9L Truck Magnum/ Jeep® Engines) B. Intake/Exhaust Gaskets Jeep 6-cylinder engines use a common intake/exhaust manifold gasket design. This gasket is designed for original replacement (includes engine set). P4529243 Intake/Exhaust Gasket (4.0L Jeep Engines) C. Throttle Body Adapter You can save time and money by using this Throttle Body Adapter from Mopar Performance. Although it will require minor fabrications, this adapter will allow you to use a stock Magnum engine throttle body on a 4-bbl carb intake. P5007865 Throttle Body Adapter (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) D. Intake Manifold Attaching Bolts A complete package of bolts required to attach the intake manifold to the cylinder heads. Set of 12. P4876772 Intake Manifold Attaching Bolts (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) MPI CONVERSION KITS AND COMPONENTS E. Conversion Kit Vibration Dampers Damper kits for use with Jeep 4.2L MPI fuel injection conversion kits. P5249688 Vibration Damper-Serpentine Belt (1981–90 4.2L Jeep Engines) P5249687 Vibration Damper-V-Belt (1981–90 4.2L Jeep Engines) F. MPI Conversion Kits Designed to make your 1981–90 Jeep vehicle more efﬁcient and powerful. The kit replaces the stock carburetor, intake manifold and other major components with multi-point injection (MPI). Each cylinder has its own injector that is activated sequentially within the ﬁring order to precisely control individual fuel requirements. These MPI Conversion Kits are self-compensating and run equally well from sea level to terrain above 12,000 feet. Mechanical components are based on production 1995 Jeep vehicle parts. P5249610AD MPI Conversion Kit — MTX; Emissions Exempt D-265-21 (1981–90 4.2L Jeep Engines) P5249686AD MPI Conversion Kit — ATX; Emissions Exempt D-265-21 (1981–90 4.2L Jeep Engines) P5007146 Engine Controller-ATX (1981–90 4.2L Jeep Engines) P5007147 Engine Controller-MTX (1981–90 4.2L Jeep Engines) P5007150 Fuel Pump-ATX and MTX (1981–90 4.2L Jeep Engines) P5007046 Crank Sensor Bracket (4.2L Jeep Engines) P5007148 Wiring Harness-ATX and MTX (1981–90 4.2L Jeep Engines) Note: ** Emissions exempt in California, Massachusetts and New York only.
	AIR SYSTEMS A. Cold Air Intake Systems Heat up your engine with a steady ﬂow of cold air! These bolt-on systems are designed to allow cooler outside air through a directional cone ﬁlter and funnel, directly into the intake manifold. These kits provide noticeable horsepower and torque gains under varying atmospheric conditions. Kits include all mounting hardware and a pre-oiled, washable/reusable ﬁlter. P5007828 Cold Air Intake System (2002–04 3.7L Liberty) P5007829 Cold Air Intake System (1997–04 4.0L Wrangler) P5007831 Cold Air Intake System (1999–04 4.7L Grand Cherokee) P5007823 Cold Air Intake System (2000–03 4.7L Dakota/Durango) P5007824 Cold Air Intake System (1997–99 5.2/5.9L Dakota/Durango) P5007825 Cold Air Intake System (2000–03 5.9L Dakota/Durango) P5007827 Cold Air Intake System (2002–03 3.7, 4.7, 5.9L Ram) P5007826 Cold Air Intake System (1994–02 5.2/5.9L Ram) P4510920 Cold Air Intake System (2003–05 5.7L Hemi® Ram) B. Air Filters* Mopar Performance Air Filters are constructed with factory tight seals, engineering level polyurethane, deep 4-ply pleats of oiled cotton gauze, and 2-layers of screen. This ﬁlter offers high ﬂow and low restriction, better throttle response and increased ﬁltration and horsepower. Filters are washable and reusable and come pre-oiled. P4510469 Air Filter (1994–01 5.2L/5.9L Ram) P4510475 Air Filter (1999–04 4.7L Grand Cherokee) P4510474 Air Filter (1991–01 4.0L Cherokee) P4510466 Air Filter (1994–01 5.2L/5.9L Ram) P4510468 Air Filter (2000–03 5.9L Dakota/Durango) P4510470 Air Filter (2002–03 3.7L, 4.7L, 5.9L Ram, not H.O) P4510471 Air Filter (2003–04 5.7L Hemi Ram) P4510473 Air Filter (1997–03 4.0L Wrangler) P4510472 Air Filter (2002–03 3.7L Liberty) P4510467 Air Filter (1997–99 5.2L/5.9L Dakota/Durango) C. Cast Air Cleaner Systems These Cast Air Cleaner Systems feature a cast aluminum lid with Mopar Performance Pentastar or Jeep® logo painted in black to match the style of the Black Wrinkle Cast Aluminum Valve Covers. Includes 12 3/4" element. P5007067 Air Cleaner Package (Jeep Vehicles) P5249807 Cast Air Cleaner System (Hemi, Big Block, Small Block, 5.2L/5.9L Truck Magnum/ Jeep Engines)
EXHAUST A. Borla Cat-Back Exhaust Systems These Exhaust Systems feature T304 stainless steel construction (aircraft quality) with mandrel-bent tubing, stainless band Torca clamps and polished tips. They provide horsepower and torque gains, improved fuel economy and a deeper tone. P5007792 Cat-Back Exhaust-3 1/2" Single Tips, Split Rear Exits, Angle Cut (2002–05 3.7L Liberty) P4510858 NEW! Cat-Back Exhaust-Single Outlet (1999–04 4.7L/4.0L Grand Cherokee) P4510857 NEW! Cat-Back Exhaust-Single Outlet (2004 Wrangler Unlimited) P4510465 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2004–05 5.7L Hemi® Ram 2500 Extended Cab, Short Bed ATX) P4510464 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2003–05 5.7L Hemi Ram 1500) P4510648 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2004 Only 5.7L Hemi Ram 1500) P4510856 NEW! Cat-Back Exhaust-Single Outlet, Low Restriction (2004–05 SRT10 Ram 1500 Standard/Quad Cab) P4510607 NEW! Cat-Back Exhaust-4.0" Single Tip, Angle Cut, 2.0" Tubing Diameter (2004–05 4.7L/5.7L Durango ATX) Note: P4510464, P4510465 and P4510648 apply to short bed ATX Ram Trucks with both quad or regular cabs, 2WD or 4WD. B. Cat-Back Exhaust System This bolt-on system features heavywall 16-gauge aluminized tubing with true mandrel bends allowing for maximum ﬂow and minimum back pressure. A low restriction, aluminized case, ﬂow-through mufﬂer with a 3.00" core produces a deep mellow exhaust note. P5007851 Cat-Back Exhaust-3.0" Single Tip, Rear Exit (2002–05 4.7L/5.9L Ram) C. NEW! Exhaust Headers Manufactured from heavy 14-gauge tubing with 3/8" thick ﬂanges. True mandrel bends and triple nickel-chrome ﬁnish make these headers the most durable on the market. Each header is engineered to achieve minimum backpressure and maximum ﬂow, resulting in increased horsepower and torque. No welding required. P4510280 Exhaust Headers (2003–04 5.7L Hemi Ram 1500 ATX 2WD) P4510873 Exhaust Headers (2003–05 5.7L Hemi Ram 1500 ATX 4WD) Note: For use of P4510280, High-Flow Exhaust Package (P4510829) must be used on 2004 models. It is recommended that High-Flow Exhaust Package (P4510364) be used with 2003 models. D. NEW! Low Restriction Exhaust Header Y-Pipe Packages These Low Restriction Exhaust Header Y-Pipe Packages will boost horsepower and torque by 10%. They feature T304 stainless steel construction and include dual high-ﬂow catalytic converters. They include dual 2.5" into a 2 into 1 Y connections and 0.065" thick walls. Packages use all factory sensors and require no welding for a direct, bolt-on ﬁt. P4510829 Exhaust Header Y-Pipe Package (2004 Only 5.7L Hemi Ram 1500 2WD, ATX) P4510364 Exhaust Header Y-Pipe Package (2003 Only 5.7L Hemi Ram 1500 2WD, ATX) P4510872 Exhaust Header Y-Pipe Package(2004 Only 5.7L Hemi Ram 1500 4WD, ATX) P4510871 Exhaust Header Y-Pipe Package (2004–05 5.7L Hemi Ram 1500 4WD, ATX)
	OILING COMPONENTS A. Oil Pump When the going gets tough, you’ll want to be sure and supply as much oil to your engine as possible. This heavy-duty, high-volume Oil Pump will do the job and take the most severe punishment. P4529241 Oil Pump (4.0L/4.2L 6-Cyl. Jeep® Vehicles) Note: P4529241 requires pan rework for 4.0L applications. B. Oil Pump Priming Shaft* Special hardened steel Oil Pump Priming Shaft ﬁts on any 3/8" or larger drill. Insert shaft into hole where distributor ﬁts. Pressurizes oil galleys to ensure against dry starts and ruining your engine. P4286800 Oil Pump Priming Shaft (V8) C. Oil Pan Gasket P5249932 Oil Pan Gasket (5.9L Dodge Truck Magnum/ Jeep Engines) D. Accelerator Return Spring Bracket Accelerator Return Spring Bracket is designed for Magnum crate engines with 4-bbl carb intake manifolds. Developed to hold accelerator pedal return spring in proper relationship to carburetor. P4876313 Accelerator Return Spring Bracket (4-bbl 300, 380, 395, 435 Magnum Crate Engines) E. Cable Mounting Bracket Cable Mounting Bracket is designed to hold the stock throttle cable to a Mopar Performance Magnum Intake Manifold. It will also hold the Throttle Cable in proper relationship to Carburetor. Hardware. P4876850 Cable Mounting Bracket (Magnum 300, 380, 395, 435 Crate Engines with Carburetor) IGNITION AND ELECTRONICS NEW! SRT10 Engine Controller (Not Pictured) Recalibrated Engine Controller is optimized for maximum vehicle performance on premium fuel when used with Cold Air Intake, Camshaft, Exhaust Headers and Exhaust System. It is similar to the system used on the One Lap of America SRT10 Ram. P4510918 Performance Engine Controller (2004 SRT10 Ram 1500) F. Distributor Cap and Rotor Set P4876255 Distributor Cap and Rotor Set (1992–97 5.2L/ 5.9L Dodge Truck Magnum/Jeep Engines) G. Intermediate Shaft Bushing P1737725 Intermediate Shaft Bushing (V6/V8) H. Ignition Wire Separator Set Ignition Wire Separator Set includes 8 pieces. Fits 7.5 mm wire. P4007667 Ignition Wire Separator Set
A. High-Performance Engine Controllers Direct replacement for production computers. Provide increases in both horsepower and torque without affecting driveability. P5249548 Engine Controller (1994–95 8.0L ATX Ram) P5249955 Engine Controller (1996 5.2L ATX Ram) P5007105 Engine Controller (1999 5.9L 4x4 ATX Federal Ram) P5249516 Engine Controller (1992–93 5.2L Dakota) P5007205 Engine Controller (2000 5.9L 4x2 ATX Federal Dakota) P5007111 Engine Controller (1999 5.9L 4x4 ATX Federal Durango) P5249545 Engine Controller (1994–95 5.2L ATX Ram and Dakota) P5007107 Engine Controller (1999 5.9L 4x2 ATX Federal Dakota) P5249546 Engine Controller (1994–95 5.9L ATX Ram) P5249935 Engine Controller (1996 5.9L ATX Ram) P5249518 Engine Controller (1993–94 5.2L 4x4 ATX Grand Cherokee) P5249702 Engine Controller (1995 5.2L 4x4 ATX Grand Cherokee) P4876898 Engine Controller (1998 5.9L 4x4 ATX Federal Grand Cherokee) Note: Emissions exempt in California, Massachusetts and New York only. Requires the use of premium unleaded fuels (92 octane or better). 1998 and later models require Vehicle Identiﬁcation Number (VIN) and Mileage encoding by a DaimlerChrysler franchised dealer. Not recommended for towing applications. B. Ignition Wires — 7.5 mm, Pre-Cut These Ignition Wire Sets are speciﬁcally designed for production computers and electronics. Each package contains high-tech style boot ends at both the distributor and plug ends of the wire. These blue wires are imprinted with the Mopar Performance name and the cylinder number. P4876431 Ignition Wire Set-7.5 mm (1992–03 3.9L Truck Magnum Engines) P4876437 Ignition Wire Set-7.5 mm (1996–00 2.5L Dakota and Wrangler) P4876436 Ignition Wire Set-7.5 mm (1991–02 4.0L Jeep® Engines) P4876432 Ignition Wire Set-7.5 mm (5.2L/5.9L Truck Magnum/Jeep Engines) P4876434 Ignition Wire Set-7.5 mm (1994–02 8.0L Ram) P4876433 Ignition Wire Set-7.5 mm (1993–98 5.2L/5.9L Truck Magnum/Jeep Engines) C. Replacement Distributors Replacement electronic ignition distributors for Jeep vehicles. Includes cap and rotor. P4529684AC Replacement Distributor (to 1991 360 AMC Jeep Engines) D. Spark Plugs Sold in sets of 4. P4876926 Spark Plug-Cross Ref. #RC12YC (Hemi® and Small Block)
	A. Universal Fit Spark Plug Wire Loom Universal Fit Spark Plug Wire Loom works with 7mm-8mm wire. Includes (4) 1/4" mounting studs (20 tpi). P5007481 Universal Fit Spark Plug Wire Loom B. Rear-Mounted Battery Kit This kit is designed for moving the battery to the rear of the vehicle to improve weight distribution. It will contribute to improved braking and less understeer in hard turns for oval racers and ralliers. Includes battery box with lid, battery hold-down bracket, battery cable, hold-down bolts and wire terminals. Does not include battery. P4349500AB Rear-Mounted Battery Kit (All RWD Applications) AUTOMATIC TRANSMISSION C. Balance Weight and Positioning Template Package The Balance Weight and Positioning Template Package is required for rebalancing performance torque converters. For use with externally balanced cast iron cranks in Magnum 360 engines. P5249843 Balance Weight and Positioning Template Package (5.9L Truck Magnum/Jeep® Engines) D. RWD Overdrive Shift Improver Package* On the A-500 and A-518 lockup overdrive automatic transmissions used in RWD trucks, the part-throttle kickdown function is retained along with the full shift pattern. Kit is designed for general purpose or high-performance applications. P5249641 Shift Improver Package-Lockup and Non Lockup (1990–95 A-518) E. RWD Torque Converter Flex Plate — 5/16" Bolts This weighted, externally balanced Torque Converter Flex Plate is for use with econo/lockup torque converters. P4876706 RWD Torque Converter Flex Plate (1996–03 5.2L/5.9L Dodge Truck Magnum/Jeep Engines) F. NEW! Transmission Overhaul Kits Packages include factory original equipment transmission seals, ﬁlters, gaskets, rings, bands and discs. P5007846 High-Performance Transmission Overhaul Kit (1990–97 A-518/A-618) P5007845 Heavy-Duty Transmission Overhaul Kit (1990–97 A-518/A-618) P5007844 High-Performance Transmission Overhaul Kit (1987–97 A-500) P5007843 Heavy Duty Transmission Overhaul Kit (1987–97 A-500) G. Heavy-Duty Transmission Cooler* Made of durable 3/4" line construction and steel. P4876916 Heavy-Duty Transmission Cooler-7 1/2" W X 17" L X 3/4" D (1967–91 Cars and Light Trucks) H. Transmission Cooler Features 3/4" line construction and steel material turbulator. P4876915 Transmission Cooler-5" W X 13" L X 3/4" D
A. Cast RWD Automatic Transmission Deep Oil Pan Packages Extra-capacity cast aluminum pan with ﬁns improves the cooling and lubrication of critical transmission components. Results in better shift performance and longer component life. A bolt-on spacer is provided to lower the ﬂuid pickup. Includes drain plug. Adds 2 quarts to sump. Includes extra hole for temperature gauge. P5007740AB RWD Deep Cast Oil Pan Package-3.90" Deep (1990–01 A-518) P5007795AB RWD Deep Cast Oil Pan Package-4.50" Deep (1989–01 A-500)
B. Torque Converters These performance Torque Converters have higher stall speeds than production units, but are less expensive than aftermarket race units. The higher stall speed offers better throttle response and a quicker launch. P5007298AB 145K Lockup Torque Converter (A-518) P5007299AB 166K Lockup Torque Converter (A-518) P5007292AB 166K Lockup Torque Converter (1993–96 A-904) P5007293AB 145K Lockup Torque Converter (1996 and newer A-500) P5007291AB 145K Lockup Torque Converter (1993–96 A-904) P5007294AB 166K Lockup Torque Converter (1996 and newer A-500)
	MANUAL TRANSMISSION PARTS A. Cast Crank Flywheel Replacement ﬂywheel for the 360 cast crank engine with external balance. Not SFI approved. It is 6-bolt for 10.50" clutch. Carb use only, including crate engines. P5249842 Cast Crank Flywheel - 130 Tooth (5.9L Truck Magnum/Jeep® Engines) B. Pilot Bearing Pilot bearing should be replaced when servicing clutch and throw- out bearing. P4876056 Pilot Bearing (5.2L/5.9L Truck Magnum/Jeep Engines) HEMI GRAPHICS FOR DODGE RAM D. NEW! Hemi® Hockey Stick Graphics Kits Kit includes Hemi® hockey stick stripes (bed side: driver and passenger) and hood stripe. Fits both long and short bed trucks. Material is Avery 2 mil high-performance cast vinyl ﬁlm, die-cut and pre-masked. Kit includes step-by-step installation instructions and application squeegee. P4510274 Silver Metallic Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) P4510273 White Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) P4510272 Black Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) E. NEW! Hemi Billboard Graphics Kits Kit includes Hemi billboard graphics (bed side: driver and passenger) and hood stripe. For short bed trucks only. Material is Avery 2 mil high-performance cast vinyl ﬁlm, die-cut and pre-masked. Kit includes step-by-step installation instructions and application squeegee. P4510277 Silver Metallic Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed) P4510275 Black Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed) P4510276 Red Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed)


	ENGINES AND BLOCK HARDWARE A. Magnum 5.9L MPI 360 Short Block Assembly This Magnum 5.9L MPI 360 Short Block Engine Assembly features a remanufactured block, along with crankshaft and connecting rods. Mopar recommends the use of a Magnum R/T Cast Iron Cylinder Head or the Aluminum Magnum Cylinder Head. Speciﬁcations: • Blocks are bored 0.020" oversize • Slightly shorter deck assures smooth gasket surface • New Engine Bearings • New Hydraulic Camshaft (requires new tappets; not included) • Properly clearanced Crankshaft and Connecting Rods • New Aluminum Pistons and Moly Piston Rrings • New Timing Gears and Chain • Balanced to use all production Magnum 5.9L components • Recommended as a direct replacement Magnum V8 Short Block for 1993 and newer trucks and Jeep® vehicles P5007549 Magnum 5.9L MPI 360 Short Block Assembly Note: Crate engines that change the emissions performance of the vehicle may not be legal for use on vehicles regulated for highway use in California and other states. Horsepower and torque rating based on test engine. Ratings may vary on individual engines. B. Engine Teardown Gasket Sets* Includes all gaskets needed for complete engine teardown. Includes oil pan, cylinder head, valve cover, timing chain cover, intake manifold, exhaust and oil pump gaskets. P4876249 Engine Teardown Gasket Set (5.9L Truck Magnum/Jeep Engines) P4876248 Engine Teardown Gasket Set (5.2L Truck Magnum/Jeep Engines) P4529245 Engine Teardown Gasket Set (4.0L Jeep Engines) C. Front Cover Gasket P4876052 Front Cover Gasket (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) CRANKSHAFTS D. Cast Crankshafts These heavy-duty surface hardened, forged Magnum Engines Cranks feature radiused ﬁllets at main and rod journals. Requires balancing. Also features 6-bolt pattern on crank ﬂange. P5007259 Cast Crankshaft-3.58" Stroke (360 Main Small Block, 5.9L Truck Magnum/Jeep Engines) P5007258 Cast Crankshaft-4.00" Stroke (360 Main Small Block, 5.9L Truck Magnum/Jeep Engines) Note: 4.00" stroke cranks require clearancing on block and the use of custom pistons.

ROLLER TIMING CHAIN AND SPROCKETS A. Timing Chain Tensioner This Timing Chain Tensioner stabilizes cam timing by reducing timing chain slack. It can be used instead of Thrust Plate P5249637. P5007709 Timing Chain Tensioner (Small Block and 3.9L, 5.2L, 5.9L Truck Magnum/Jeep® Engines) B. Double Roller Chain and Sprocket Sets These high-strength Double Roller Chain and Sprocket Sets provide added durability and decreased rotational friction compared to the production silent chains. Sets include magna-ﬂuxed sprockets and roller timing chain. P5249267 Double Roller Chain and Sprocket Set — 1-Bolt, 3 Matched Keyways (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) P5249519 Double Roller Chain and Sprocket Set- 1-Bolt Mount, 1 Keyway (2.5L/4.0L Jeep Engines) C. Flywheel Attaching Package This Flywheel Attaching Package from Mopar Performance contains all bolts required to attach the ﬂywheel and clutch to the engine assembly. Includes 6 ﬂywheel bolts, 6 clutch bolts, pilot bearing, and seal. P4529636AB Flywheel Attaching Package (4.0 AMC 360 MTX Jeep Engines) VIBRATION DAMPERS D. Thin Crank Vibration Damper This production-style Thin Crank Vibration Damper is designed for all production balanced Small Blocks. Not SFI approved. P5007187 Thin Crank Vibration Damper (5.9L Truck Magnum/ Jeep Engines, 5.9L Magnum Crate Engines) E. Production Replacement Vibration Damper Production Replacement Damper is compatible with production crank and piston rod weight. P5249535 Production Replacement Vibration Damper- V-Belt (4.2L Jeep Engines) F. Damper Attachment Package This package contains parts necessary to attach the vibration damper to the crankshaft. P4529677 Damper Attachment Package (2.5L/4.0L Jeep Engines) G. Damper Degree Timing Tape Improve timing accuracy with this Damper Degree Timing Tape. Marked in 90° increments. Self-adhesive strip adheres to the Crank Vibration Damper for clear identiﬁcation of marks. Permits initial total spark advance up to 60° instead of only 10°–15° as on chain case timing tab. P4529070AB Damper Degree Timing Tape Note: Damper not included.

A. Purple Shaft Camshafts Mopar Performance cams are designed and engineered exclusively for your engine. A wide range of proﬁles is available, from mild to wild, and bracket to all-out racing. All Mopar Performance cams are designed, developed, dyno’d, and track tested by engineers. These cams are developed for increased power and rpm potential while maintaining reliability and the best possible low-speed characteristics, including torque and idle quality. These Purple Shaft cams offer the best horsepower-to-dollar-spent value. Each cam package contains the cam, cam lube, instruction sheet and tappets. P5249549 Hydraulic Roller Camshaft (5.2L/5.9L Truck Magnum/Jeep® Engines) P5007551 Hydraulic Roller Camshaft (5.2L/5.9L Truck Magnum/Jeep Engines) P4529230AB Hydraulic Camshaft (4.0L Jeep Engines) P4529228AB Hydraulic Camshaft (4.0L Jeep Engines) *P4529229AB Hydraulic Camshaft (4.0L Jeep Engines)	B. Hydraulic Roller Tappets Sold as sets of 16 or individually for service. P5249862 Hydraulic Roller Tappets-Set of 16 (5.2L /5.9L Truck Magnum/Jeep Engines, Magnum Crate) P4876054 Hydraulic Roller Tappet-Sold Individually (5.2L/5.9L Truck Magnum/Jeep Engines) P4529220AB Hydraulic Roller Tappet-Sold Individually (2.5L/4.0L Jeep Engines) *P4876055 Tappet Aligning Yoke (5.2L/5.9L Truck Magnum/Jeep Engines)
	C. Offset Camshaft Key Set For centerlining your camshaft, these hardened keys are color coded in 1°, 2°, 3°, 4° and 5° increments. Production key is used for zero offset. P5249600 Offset Camshaft Key Set (3.7L, 3.9L, 4.7L, 5.2L, 5.9L Truck Magnum/Jeep Engines) Note: Color Code for Cam Keys: Natural=1˚, Red=2˚, Blue=3˚, Yellow=4˚, White=5˚. D. Pushrods* Mopar Performace Pushrods are sold as complete engine sets (16 for V8 engines; 12 for 6-cylinder engines). P4529675 Pushrods-Set of 12 (1987–89 4.0L Jeep Engines) P5249662 Hydraulic Roller Pushrods-6.92", Set of 16 (5.2L/5.9L Truck Magnum/Jeep Engines, Magnum Crate)

CYLINDER HEADS, GASKETS AND HARDWARE A. Aluminum Cylinder Head This Magnum engine Cylinder Head features: • Higher airﬂow and performance over the stock cast iron Magnum engine heads • 10-bolt production Valve Cover • 8 mm Valve Stems • Unique vertical style Intake Manifold attachment • Production valve gear, except for larger 3/8" studs • Machined for 1.92" Intake Valves and 1 5/8" Exhaust Valves • Designed with smaller 53 cc combustion chamber • Uses production exhaust ﬂange pattern • No heat crossover • Lighter weight than cast iron • Intake runner 177 cc P4876624 Aluminum Magnum Cylinder Head (5.2L/5.9L Truck Magnum/Jeep® Engines, Magnum Crate Engines) Note: Production guide plates must be drilled to 3/8". B. Magnum R/T Cast Iron Cylinder Heads These heads feature: • Unique all-new casting for Magnum V8 engines • Higher airﬂow and better performance than stock cast iron Magnum engine Cylinder Heads • 10-bolt Magnum engine production Valve Cover design • 8 mm Valve Stems • Vertical style Intake Manifold attachment • Production valve gear (i.e., Rocker Arms, Valves, Valve Springs, Keepers and Retainers) • Works with factory and Mopar Performance Magnum engines plus stock Intake Manifolds, Exhaust Manifolds and Valve Covers P5007145 Magnum R/T Cast Iron Head Assembly-1.92" Int./1.625" Ex. (5.2L/5.9L Truck Magnum/Jeep Engines) P5007140 Magnum R/T Cast Iron Head-1.92" Intake, 1 5/8" Exhaust (5.2L/5.9L Truck Magnum/Jeep Engines) P5007141 Magnum R/T Cast Iron Head-2.02" Intake, 1 5/8" Exhaust (5.2L/5.9L Truck Magnum/Jeep Engines)
	A. Cylinder Head Gaskets These Cylinder Head Gaskets can be used as replacements or for heavy-duty/competition applications. P4876048 Composition Material Gaskets-to 12.5:1, 0.040–0.042 Thick, Set of 2 (5.2/5.9L Truck Magnum/Jeep® Engines) P4529242 Cylinder Head Gasket-Sold Individually (4.0L Jeep Engines) B. Head Bolt Set Head Bolt Set includes all head bolts and washers as required. P4876759 Aluminum Commando Cylinder Head Bolt Set (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) C. Hardened Washer Sets Hardened Washer Sets for use with head bolts and main caps. They are sold in sets of 20. P4120456 Hardened Washer Set — 3/8" (426 Hemi®, Big Block, Small Block, Truck Magnum/Jeep Engines) P4120459 Hardened Washer Set-1/2" (426 Hemi, Big Block, Small Block, Truck Magnum/Jeep Engines) VALVE COVERS AND HARDWARE D. Polished Cast Aluminum Valve Cover Set Cast aluminum Magnum engine logo valve cover is high strength to be more rigid for better antileak properties. Set includes 20 screws and washer assemblies, all grommets and quarter-turn oil ﬁller cap. Gaskets must be ordered separately. P5007618 Polished Cast Aluminum Valve Cover Set (5.2L/5.9L Dodge Truck Magnum Engines) P5249660 Valve Cover Gaskets — 10-Bolt Mold Rubber, Steel Shim (5.2L/5.9L Truck Magnum/Jeep Engines) E. NEW! 5.7L Hemi Valve Cover Set These Valve Covers feature a ParmasterTM chrome ﬁnish. A perfect way to dress up any factory 5.7L Hemi engine. They will not discolor under heat. Set includes 2 valve covers, valve cover gaskets and spark plug seals. P4510845 PermasterTM Chrome Valve Covers (5.7L Hemi Crate Engine, Production 5.7L Engines) F. Black Wrinkle Cast Aluminum Valve Cover Sets Magnum Valve Covers feature the Mopar Pentastar logo, while Jeep Valve Covers feature the Jeep logo. Sets include 2 valve covers for 5.2L/5.9L engines; 1 for 4.2L engines. Sets include attaching screws, grommets, bafﬂe and oil ﬁller cap. Gaskets must be purchased separately. P5007617 Black Wrinkle Valve Cover Set (5.2L/5.9L Truck Magnum Engines) P5007619 Black Wrinkle Valve Cover Set (1993–98 5.2L/5.9L Jeep Engines) P4876388 Black Wrinkle Valve Cover (1981–86 4.2L Jeep Engines) P5249660 Valve Cover Gaskets- 10-Bolt Mold Rubber, Steel Shim (5.2L/5.9L Truck Magnum Engines) P5007854 Valve Cover Gasket (4.2L Jeep Engines)
A. Chrome Breather Caps Use to ﬁll extra valve cover holes in cast aluminum valve covers. P4529880 Twist-On Bottom Vented Breather Cap (Big Block, Small Block, 5.2L/5.9L Truck Magnum/Jeep® Engines) P4529881 Push-In Style Breather Cap (Big Block, Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) P4529882 Rubber Grommet-for Breather Cap P4529881 B. Bafﬂe and Screw Package* For cast aluminum valve covers only. P5007052 Bafﬂe and Screw Package (Big Block, Small Block, Dodge Truck Magnum/Jeep Engines) C. Cast Aluminum Valve Cover Chrome Bolt Set For cast aluminum valve covers only. Includes 20 bolts. P5007620 Cast Aluminum Valve Cover Bolt Set (Small Block, 5.2L/5.9L Truck Magnum/Jeep Engines) D. Cast Aluminum Valve Cover Grommet Set Set includes 1 Grommet for PVC and for 1 breather. P5249642 Cast Aluminum Valve Cover Grommet Set (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) VALVES AND VALVE HARDWARE E. Valves These stainless Valves have swirl-polished underheads that have no ﬂat or ski jump areas. They feature a 8 mm stem and 1 square groove. P5249876 Exhaust Valve-1.625" Diameter, 4.93" Stem Length (3.9L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249875 Intake Valve-1.92" Diameter, 4.91" Stem (2.5L, 3.9L,4.0L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249877 Intake Valve-1.97" Diameter, 4.91" Stem (2.5L, 3.9L, 4.0L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249878 Intake Valve-2.02" Diameter, 4.91" Stem Length (3.9L, 5.2L, 5.9L Truck Magnum/Jeep Engines) P5249880 Exhaust Valve-1.56" Diameter, 4.93" Stem Length (2.5L/4.0L Jeep Engines) P5249879 Exhaust Valve-1.50" Diameter, 4.93" Stem Length (2.5L/4.0L Jeep Engines) F. Valve Seals Made of high-temp Viton material, these Valve Seals feature a full or semi-umbrella shape for best dual-purpose use. Seals help prevent oil seepage down valve guides. Not recommended for use with dual Valve Springs. Sold in sets of 16. P5249661 Valve Seals-5/16" Stem Size, 0.530" Guide (426 Hemi, 5.2L/5.9L Truck Magnum/Jeep Engines) P4529240 Valve Seals-8 mm Stem Size (4.0L Jeep Engines) G. Valve Stem Lash Caps These Valve Stem Lash Caps are 0.080" thick. They are made of hardened steel for improved rocker tip durability. Larger area than stock valve tip to help spread the rocker loads. Sold in sets of 16. P4120626 Valve Stem Lash Caps-3/8" Stem (426 Hemi®, Big Block, Small Block, Truck Magnum/Jeep Engines) P4120635 Valve Stem Lash Caps-5/16" Stem (426 Hemi, Big Block, Small Block, Truck Magnum/Jeep Engines)
A. Valve Springs High-pressure Valve Springs can be used on exhaust and intake valves for all high-performance applications. They feature a shorter fully compressed height and allow for increased valve lift. Springs maintain spring load at higher rpms. A must for high-performance cams. Sold individually. P4529214 Valve Spring (1981–87 2.5L/4.0L Jeep® Engines) P4529215 Valve Spring (1988–02 2.5L/4.0L Jeep Engines) P5249464 Valve Spring (3.9L, 5.2L, 5.9L Dodge Truck Magnum/Jeep Engines) P4876062 Valve Spring (5.2L/5.9L Truck Magnum/ Jeep Engines)
B. Valve Spring Retainers Restore worn or damaged valve train components to factory speciﬁcations with these durable Valve Spring Retainers. Use with 8° locks. 8 mm valve stem diameter. Sold individually. P4529216 Steel Valve Spring Retainer (2.5L/4.0L Jeep Engines) P4529217 Steel Valve Spring Retainer (2.5L/4.0L Jeep Engines) *P4452032 Chrome Moly Valve Spring Retainer (2.2L/2.5L SOHC, Dodge Truck Magnum/Jeep Engines)
	C. Valve Keepers (Locks) These single groove style Valve Keepers are made from hardened steel material. They feature 8° angles, an 8 mm stem diameter, and can be used for restoration or performance applications. Sold as cylinder head sets of 16. P4529218 Valve Keepers-For Retainers P4529216–17 (5.2L/5.9L Truck Magnum/Jeep Engines, 2.5L/4.0L Jeep Engines) ROCKER ARMS AND HARDWARE D. Roller Rocker Arm Sets — Complete Engine These complete engine Roller Rocker Arm Sets for Magnum engines include 16 roller tip Rocker Arms, Pivots, Guides, and Pushrods. Rockers are die cast aluminum and are individually adjustable. Can be used as heavy-duty replacement with Hydraulic Cams, standard or high-performance. May interfere with production Magnum engine Valve Covers. P5007404 Roller Rocker Arm Set-1.7 Ratio (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) P5249800AB Roller Rocker Arm Set-Stock 1.6 Ratio (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) Note: High-ratio rockers will increase valve lift-use matching valve spring, and check piston to valve clearance.
A. Roller Rocker Arm Set — Single Cylinder This single cylinder Roller Rocker Arm Set for Jeep® vehicles includes 1 cylinder set of 2 rockers, 2 support stands, rocker shaft and screws. Extruded aluminum rockers, anodized blue. Can be used with hydraulic, mechanical or roller cams. Roller tip and center pivot bearing to reduce internal friction. Provides exact geometry and 1.6:1 ratio. Adjustable, oil through pushrod style. P4529885 Roller Rocker Arm Set-Single Cylinder (2.5L, 4.0L, and 4.2L Jeep Engines) Note: 2.5L and 4.0L engines require aftermarket spacer for valve cover clearance. B. Production Replacement Rocker Arm Set Single Cylinder Rocker Arm set consists of 2 rocker arms, 2 pivots, 2 attaching bolts and 1 guide. Designed for use with hydraulic cams only. Production 1.6 design ratio. P4876050 Rocker Arm Set-Single Cylinder (5.9L Magnum Engines, Magnum Crate Engines, not 4.7L) C. Rocker Arm Heavy-duty stamped rocker for use with hydraulic cams only. Can be used to service stock Jeep engines. Sold individually. P4529221 Rocker Arm (2.5L/4.0L Jeep Engines) D. Rocker Arm Pivot Package Larger 3/8" diameter (stock 5/16"). Requires attaching hole enlargement on cast iron heads, standard on aluminum Magnum engines. Set of 16. P4876514 Rocker Arm Pivot Package-3/8" (3.9L, 5.2L and 5.9L Magnum Engines) Note: Requires guide plate to be drilled with 3/8" hole. E. Rocker Arm Stud Kits Required with aluminum Magnum engine Cylinder Heads and Aluminum Roller Rocker Arms. *P5007645 Roller Rocker Stud Kit-3/8" Coarse Thread (5.2L/5.9L Truck Magnum/Jeep Engines) P4876963 Rocker Stud Kit-3/8" (Truck Magnum)
	INTAKE MANIFOLDS When it comes to Intake Manifolds for your engine, don’t settle for the “also rans." Insist on the real deal. Only Mopar Performance Intakes are designed and developed by Chrysler engineers for Chrysler engines using only original equipment speciﬁcations for power and performance. A. Aluminum Dual Plane Intake — 4-bbl This Aluminum 4-bbl Dual Plane Intake Manifold permits the user to convert from EFI to carburated. Power range is idle–5000 rpm. P5007381 Aluminum Dual Plane Intake-4-bbl Carb (5.2L/5.9L Truck Magnum/Jeep® Engines) B. Aluminum Single Plane Intake — 4-bbl* This Aluminum Single Plane Intake Manifold permits the user to convert from EFI to carburated. Power range is 3000–6500 rpm. Perfect for engine swaps! P5007380 Aluminum Single Plane Intake-4-bbl Carb (5.2L/5.9L Truck Magnum/Jeep Engines, Magnum Crate) Note: Single plane manifolds may cause hood clearance problems. Check clearance with carburetor and air cleaner installed. C. Aluminum Single Plane Intakes — MPI* These MPI Intake Manifolds can be used as a direct replacement for 5.2L and 5.9L production engines. They are designed to use production throttle body, injectors, fuel rail and other hardware from your stock intake. Available in EGR and non-EGR. P5007852 Aluminum Single Plane Intake — 2-bbl MPI w/o EGR (1998–03 5.2L/5.9L Truck Magnum/Jeep Engines) P5007398AB Aluminum Single Plane Intake — 2-bbl MPI w/EGR (1992–97 5.2L/5.9L Truck Magnum/Jeep Engines) P5007791 Aluminum Single Plane Intake — 2/4-bbl MPI, Left Linkage (5.2L/5.9L Magnum Engine Conversion) P5007790 Aluminum Single Plane Intake — 2/4-bbl MPI, Right Linkage (5.2L/5.9L Truck Magnum/Jeep Engines) P5007638 Intake Manifold Installation Kit (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) Note: P5007398AB and P5007852 allows use of A/C and all factory accessories. Replacement for stock. Each may require modiﬁcations in some applications. Requires installation kit P5007638. INTAKE MANIFOLD HARDWARE D. Intake Manifold Installation Kit This installation kit is needed to install the Magnum engine single plane 2-bbl MPI intake manifolds (P5007398AB and P5007852). Kit includes all the necessary bolts, hardware, spacers and wire. P5007638 Intake Manifold Installation Kit (5.2L/5.9L Truck Magnum/Jeep Engines) E. Intake Manifold Attaching Package Package of factory original nuts and bolts to attach intake manifold and exhaust manifolds. Includes 5 bolts, 7 washers, 4 studs, 2 pins, 2 spacers, and 3 plugs for Jeep engines. P4529680 Intake Manifold Attaching Package (1987–89 4.0L Jeep Engines)
A. Intake Manifold Gasket Set Custom ﬁt Intake Manifold Gasket for use with Mopar Performance Magnum engine Cylinder Heads. Kits come complete to service 1 engine set (includes gaskets, end seals, o-rings and distributor seal where applicable). P4876049 Intake Manifold Gasket Set (5.9L Truck Magnum/ Jeep® Engines) B. Intake/Exhaust Gaskets Jeep 6-cylinder engines use a common intake/exhaust manifold gasket design. This gasket is designed for original replacement (includes engine set). P4529243 Intake/Exhaust Gasket (4.0L Jeep Engines) C. Throttle Body Adapter You can save time and money by using this Throttle Body Adapter from Mopar Performance. Although it will require minor fabrications, this adapter will allow you to use a stock Magnum engine throttle body on a 4-bbl carb intake. P5007865 Throttle Body Adapter (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) D. Intake Manifold Attaching Bolts A complete package of bolts required to attach the intake manifold to the cylinder heads. Set of 12. P4876772 Intake Manifold Attaching Bolts (5.2L/5.9L Dodge Truck Magnum/Jeep Engines) MPI CONVERSION KITS AND COMPONENTS E. Conversion Kit Vibration Dampers Damper kits for use with Jeep 4.2L MPI fuel injection conversion kits. P5249688 Vibration Damper-Serpentine Belt (1981–90 4.2L Jeep Engines) P5249687 Vibration Damper-V-Belt (1981–90 4.2L Jeep Engines) F. MPI Conversion Kits Designed to make your 1981–90 Jeep vehicle more efﬁcient and powerful. The kit replaces the stock carburetor, intake manifold and other major components with multi-point injection (MPI). Each cylinder has its own injector that is activated sequentially within the ﬁring order to precisely control individual fuel requirements. These MPI Conversion Kits are self-compensating and run equally well from sea level to terrain above 12,000 feet. Mechanical components are based on production 1995 Jeep vehicle parts. P5249610AD MPI Conversion Kit — MTX; Emissions Exempt D-265-21 (1981–90 4.2L Jeep Engines) P5249686AD MPI Conversion Kit — ATX; Emissions Exempt D-265-21 (1981–90 4.2L Jeep Engines) P5007146 Engine Controller-ATX (1981–90 4.2L Jeep Engines) P5007147 Engine Controller-MTX (1981–90 4.2L Jeep Engines) P5007150 Fuel Pump-ATX and MTX (1981–90 4.2L Jeep Engines) P5007046 Crank Sensor Bracket (4.2L Jeep Engines) P5007148 Wiring Harness-ATX and MTX (1981–90 4.2L Jeep Engines) Note: ** Emissions exempt in California, Massachusetts and New York only.
	AIR SYSTEMS A. Cold Air Intake Systems Heat up your engine with a steady ﬂow of cold air! These bolt-on systems are designed to allow cooler outside air through a directional cone ﬁlter and funnel, directly into the intake manifold. These kits provide noticeable horsepower and torque gains under varying atmospheric conditions. Kits include all mounting hardware and a pre-oiled, washable/reusable ﬁlter. P5007828 Cold Air Intake System (2002–04 3.7L Liberty) P5007829 Cold Air Intake System (1997–04 4.0L Wrangler) P5007831 Cold Air Intake System (1999–04 4.7L Grand Cherokee) P5007823 Cold Air Intake System (2000–03 4.7L Dakota/Durango) P5007824 Cold Air Intake System (1997–99 5.2/5.9L Dakota/Durango) P5007825 Cold Air Intake System (2000–03 5.9L Dakota/Durango) P5007827 Cold Air Intake System (2002–03 3.7, 4.7, 5.9L Ram) P5007826 Cold Air Intake System (1994–02 5.2/5.9L Ram) P4510920 Cold Air Intake System (2003–05 5.7L Hemi® Ram) B. Air Filters* Mopar Performance Air Filters are constructed with factory tight seals, engineering level polyurethane, deep 4-ply pleats of oiled cotton gauze, and 2-layers of screen. This ﬁlter offers high ﬂow and low restriction, better throttle response and increased ﬁltration and horsepower. Filters are washable and reusable and come pre-oiled. P4510469 Air Filter (1994–01 5.2L/5.9L Ram) P4510475 Air Filter (1999–04 4.7L Grand Cherokee) P4510474 Air Filter (1991–01 4.0L Cherokee) P4510466 Air Filter (1994–01 5.2L/5.9L Ram) P4510468 Air Filter (2000–03 5.9L Dakota/Durango) P4510470 Air Filter (2002–03 3.7L, 4.7L, 5.9L Ram, not H.O) P4510471 Air Filter (2003–04 5.7L Hemi Ram) P4510473 Air Filter (1997–03 4.0L Wrangler) P4510472 Air Filter (2002–03 3.7L Liberty) P4510467 Air Filter (1997–99 5.2L/5.9L Dakota/Durango) C. Cast Air Cleaner Systems These Cast Air Cleaner Systems feature a cast aluminum lid with Mopar Performance Pentastar or Jeep® logo painted in black to match the style of the Black Wrinkle Cast Aluminum Valve Covers. Includes 12 3/4" element. P5007067 Air Cleaner Package (Jeep Vehicles) P5249807 Cast Air Cleaner System (Hemi, Big Block, Small Block, 5.2L/5.9L Truck Magnum/ Jeep Engines)
EXHAUST A. Borla Cat-Back Exhaust Systems These Exhaust Systems feature T304 stainless steel construction (aircraft quality) with mandrel-bent tubing, stainless band Torca clamps and polished tips. They provide horsepower and torque gains, improved fuel economy and a deeper tone. P5007792 Cat-Back Exhaust-3 1/2" Single Tips, Split Rear Exits, Angle Cut (2002–05 3.7L Liberty) P4510858 NEW! Cat-Back Exhaust-Single Outlet (1999–04 4.7L/4.0L Grand Cherokee) P4510857 NEW! Cat-Back Exhaust-Single Outlet (2004 Wrangler Unlimited) P4510465 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2004–05 5.7L Hemi® Ram 2500 Extended Cab, Short Bed ATX) P4510464 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2003–05 5.7L Hemi Ram 1500) P4510648 NEW! Cat-Back Exhaust-4.0" Single Tips, Split Side Exit, Angle Cut (2004 Only 5.7L Hemi Ram 1500) P4510856 NEW! Cat-Back Exhaust-Single Outlet, Low Restriction (2004–05 SRT10 Ram 1500 Standard/Quad Cab) P4510607 NEW! Cat-Back Exhaust-4.0" Single Tip, Angle Cut, 2.0" Tubing Diameter (2004–05 4.7L/5.7L Durango ATX) Note: P4510464, P4510465 and P4510648 apply to short bed ATX Ram Trucks with both quad or regular cabs, 2WD or 4WD. B. Cat-Back Exhaust System This bolt-on system features heavywall 16-gauge aluminized tubing with true mandrel bends allowing for maximum ﬂow and minimum back pressure. A low restriction, aluminized case, ﬂow-through mufﬂer with a 3.00" core produces a deep mellow exhaust note. P5007851 Cat-Back Exhaust-3.0" Single Tip, Rear Exit (2002–05 4.7L/5.9L Ram) C. NEW! Exhaust Headers Manufactured from heavy 14-gauge tubing with 3/8" thick ﬂanges. True mandrel bends and triple nickel-chrome ﬁnish make these headers the most durable on the market. Each header is engineered to achieve minimum backpressure and maximum ﬂow, resulting in increased horsepower and torque. No welding required. P4510280 Exhaust Headers (2003–04 5.7L Hemi Ram 1500 ATX 2WD) P4510873 Exhaust Headers (2003–05 5.7L Hemi Ram 1500 ATX 4WD) Note: For use of P4510280, High-Flow Exhaust Package (P4510829) must be used on 2004 models. It is recommended that High-Flow Exhaust Package (P4510364) be used with 2003 models. D. NEW! Low Restriction Exhaust Header Y-Pipe Packages These Low Restriction Exhaust Header Y-Pipe Packages will boost horsepower and torque by 10%. They feature T304 stainless steel construction and include dual high-ﬂow catalytic converters. They include dual 2.5" into a 2 into 1 Y connections and 0.065" thick walls. Packages use all factory sensors and require no welding for a direct, bolt-on ﬁt. P4510829 Exhaust Header Y-Pipe Package (2004 Only 5.7L Hemi Ram 1500 2WD, ATX) P4510364 Exhaust Header Y-Pipe Package (2003 Only 5.7L Hemi Ram 1500 2WD, ATX) P4510872 Exhaust Header Y-Pipe Package(2004 Only 5.7L Hemi Ram 1500 4WD, ATX) P4510871 Exhaust Header Y-Pipe Package (2004–05 5.7L Hemi Ram 1500 4WD, ATX)
	OILING COMPONENTS A. Oil Pump When the going gets tough, you’ll want to be sure and supply as much oil to your engine as possible. This heavy-duty, high-volume Oil Pump will do the job and take the most severe punishment. P4529241 Oil Pump (4.0L/4.2L 6-Cyl. Jeep® Vehicles) Note: P4529241 requires pan rework for 4.0L applications. B. Oil Pump Priming Shaft* Special hardened steel Oil Pump Priming Shaft ﬁts on any 3/8" or larger drill. Insert shaft into hole where distributor ﬁts. Pressurizes oil galleys to ensure against dry starts and ruining your engine. P4286800 Oil Pump Priming Shaft (V8) C. Oil Pan Gasket P5249932 Oil Pan Gasket (5.9L Dodge Truck Magnum/ Jeep Engines) D. Accelerator Return Spring Bracket Accelerator Return Spring Bracket is designed for Magnum crate engines with 4-bbl carb intake manifolds. Developed to hold accelerator pedal return spring in proper relationship to carburetor. P4876313 Accelerator Return Spring Bracket (4-bbl 300, 380, 395, 435 Magnum Crate Engines) E. Cable Mounting Bracket Cable Mounting Bracket is designed to hold the stock throttle cable to a Mopar Performance Magnum Intake Manifold. It will also hold the Throttle Cable in proper relationship to Carburetor. Hardware. P4876850 Cable Mounting Bracket (Magnum 300, 380, 395, 435 Crate Engines with Carburetor) IGNITION AND ELECTRONICS NEW! SRT10 Engine Controller (Not Pictured) Recalibrated Engine Controller is optimized for maximum vehicle performance on premium fuel when used with Cold Air Intake, Camshaft, Exhaust Headers and Exhaust System. It is similar to the system used on the One Lap of America SRT10 Ram. P4510918 Performance Engine Controller (2004 SRT10 Ram 1500) F. Distributor Cap and Rotor Set P4876255 Distributor Cap and Rotor Set (1992–97 5.2L/ 5.9L Dodge Truck Magnum/Jeep Engines) G. Intermediate Shaft Bushing P1737725 Intermediate Shaft Bushing (V6/V8) H. Ignition Wire Separator Set Ignition Wire Separator Set includes 8 pieces. Fits 7.5 mm wire. P4007667 Ignition Wire Separator Set
A. High-Performance Engine Controllers Direct replacement for production computers. Provide increases in both horsepower and torque without affecting driveability. P5249548 Engine Controller (1994–95 8.0L ATX Ram) P5249955 Engine Controller (1996 5.2L ATX Ram) P5007105 Engine Controller (1999 5.9L 4x4 ATX Federal Ram) P5249516 Engine Controller (1992–93 5.2L Dakota) P5007205 Engine Controller (2000 5.9L 4x2 ATX Federal Dakota) P5007111 Engine Controller (1999 5.9L 4x4 ATX Federal Durango) P5249545 Engine Controller (1994–95 5.2L ATX Ram and Dakota) P5007107 Engine Controller (1999 5.9L 4x2 ATX Federal Dakota) P5249546 Engine Controller (1994–95 5.9L ATX Ram) P5249935 Engine Controller (1996 5.9L ATX Ram) P5249518 Engine Controller (1993–94 5.2L 4x4 ATX Grand Cherokee) P5249702 Engine Controller (1995 5.2L 4x4 ATX Grand Cherokee) P4876898 Engine Controller (1998 5.9L 4x4 ATX Federal Grand Cherokee) Note: Emissions exempt in California, Massachusetts and New York only. Requires the use of premium unleaded fuels (92 octane or better). 1998 and later models require Vehicle Identiﬁcation Number (VIN) and Mileage encoding by a DaimlerChrysler franchised dealer. Not recommended for towing applications. B. Ignition Wires — 7.5 mm, Pre-Cut These Ignition Wire Sets are speciﬁcally designed for production computers and electronics. Each package contains high-tech style boot ends at both the distributor and plug ends of the wire. These blue wires are imprinted with the Mopar Performance name and the cylinder number. P4876431 Ignition Wire Set-7.5 mm (1992–03 3.9L Truck Magnum Engines) P4876437 Ignition Wire Set-7.5 mm (1996–00 2.5L Dakota and Wrangler) P4876436 Ignition Wire Set-7.5 mm (1991–02 4.0L Jeep® Engines) P4876432 Ignition Wire Set-7.5 mm (5.2L/5.9L Truck Magnum/Jeep Engines) P4876434 Ignition Wire Set-7.5 mm (1994–02 8.0L Ram) P4876433 Ignition Wire Set-7.5 mm (1993–98 5.2L/5.9L Truck Magnum/Jeep Engines) C. Replacement Distributors Replacement electronic ignition distributors for Jeep vehicles. Includes cap and rotor. P4529684AC Replacement Distributor (to 1991 360 AMC Jeep Engines) D. Spark Plugs Sold in sets of 4. P4876926 Spark Plug-Cross Ref. #RC12YC (Hemi® and Small Block)
	A. Universal Fit Spark Plug Wire Loom Universal Fit Spark Plug Wire Loom works with 7mm-8mm wire. Includes (4) 1/4" mounting studs (20 tpi). P5007481 Universal Fit Spark Plug Wire Loom B. Rear-Mounted Battery Kit This kit is designed for moving the battery to the rear of the vehicle to improve weight distribution. It will contribute to improved braking and less understeer in hard turns for oval racers and ralliers. Includes battery box with lid, battery hold-down bracket, battery cable, hold-down bolts and wire terminals. Does not include battery. P4349500AB Rear-Mounted Battery Kit (All RWD Applications) AUTOMATIC TRANSMISSION C. Balance Weight and Positioning Template Package The Balance Weight and Positioning Template Package is required for rebalancing performance torque converters. For use with externally balanced cast iron cranks in Magnum 360 engines. P5249843 Balance Weight and Positioning Template Package (5.9L Truck Magnum/Jeep® Engines) D. RWD Overdrive Shift Improver Package* On the A-500 and A-518 lockup overdrive automatic transmissions used in RWD trucks, the part-throttle kickdown function is retained along with the full shift pattern. Kit is designed for general purpose or high-performance applications. P5249641 Shift Improver Package-Lockup and Non Lockup (1990–95 A-518) E. RWD Torque Converter Flex Plate — 5/16" Bolts This weighted, externally balanced Torque Converter Flex Plate is for use with econo/lockup torque converters. P4876706 RWD Torque Converter Flex Plate (1996–03 5.2L/5.9L Dodge Truck Magnum/Jeep Engines) F. NEW! Transmission Overhaul Kits Packages include factory original equipment transmission seals, ﬁlters, gaskets, rings, bands and discs. P5007846 High-Performance Transmission Overhaul Kit (1990–97 A-518/A-618) P5007845 Heavy-Duty Transmission Overhaul Kit (1990–97 A-518/A-618) P5007844 High-Performance Transmission Overhaul Kit (1987–97 A-500) P5007843 Heavy Duty Transmission Overhaul Kit (1987–97 A-500) G. Heavy-Duty Transmission Cooler* Made of durable 3/4" line construction and steel. P4876916 Heavy-Duty Transmission Cooler-7 1/2" W X 17" L X 3/4" D (1967–91 Cars and Light Trucks) H. Transmission Cooler Features 3/4" line construction and steel material turbulator. P4876915 Transmission Cooler-5" W X 13" L X 3/4" D
A. Cast RWD Automatic Transmission Deep Oil Pan Packages Extra-capacity cast aluminum pan with ﬁns improves the cooling and lubrication of critical transmission components. Results in better shift performance and longer component life. A bolt-on spacer is provided to lower the ﬂuid pickup. Includes drain plug. Adds 2 quarts to sump. Includes extra hole for temperature gauge. P5007740AB RWD Deep Cast Oil Pan Package-3.90" Deep (1990–01 A-518) P5007795AB RWD Deep Cast Oil Pan Package-4.50" Deep (1989–01 A-500)
B. Torque Converters These performance Torque Converters have higher stall speeds than production units, but are less expensive than aftermarket race units. The higher stall speed offers better throttle response and a quicker launch. P5007298AB 145K Lockup Torque Converter (A-518) P5007299AB 166K Lockup Torque Converter (A-518) P5007292AB 166K Lockup Torque Converter (1993–96 A-904) P5007293AB 145K Lockup Torque Converter (1996 and newer A-500) P5007291AB 145K Lockup Torque Converter (1993–96 A-904) P5007294AB 166K Lockup Torque Converter (1996 and newer A-500)
	MANUAL TRANSMISSION PARTS A. Cast Crank Flywheel Replacement ﬂywheel for the 360 cast crank engine with external balance. Not SFI approved. It is 6-bolt for 10.50" clutch. Carb use only, including crate engines. P5249842 Cast Crank Flywheel - 130 Tooth (5.9L Truck Magnum/Jeep® Engines) B. Pilot Bearing Pilot bearing should be replaced when servicing clutch and throw- out bearing. P4876056 Pilot Bearing (5.2L/5.9L Truck Magnum/Jeep Engines) HEMI GRAPHICS FOR DODGE RAM D. NEW! Hemi® Hockey Stick Graphics Kits Kit includes Hemi® hockey stick stripes (bed side: driver and passenger) and hood stripe. Fits both long and short bed trucks. Material is Avery 2 mil high-performance cast vinyl ﬁlm, die-cut and pre-masked. Kit includes step-by-step installation instructions and application squeegee. P4510274 Silver Metallic Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) P4510273 White Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) P4510272 Black Hemi Hockey Stick Graphics Kit (Dodge Ram 6.5’ and 8.0’ Bed) E. NEW! Hemi Billboard Graphics Kits Kit includes Hemi billboard graphics (bed side: driver and passenger) and hood stripe. For short bed trucks only. Material is Avery 2 mil high-performance cast vinyl ﬁlm, die-cut and pre-masked. Kit includes step-by-step installation instructions and application squeegee. P4510277 Silver Metallic Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed) P4510275 Black Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed) P4510276 Red Hemi Billboard Graphics Kit (Dodge Ram 6.5' Bed)