A. NEW! Billet Yoke Kits
Billet Yoke Kits for use with 742 or 489 housing or Mopar
Performance aluminum housing (P4876445). Kits include
u-bolts and pinion nut.
P4510638 Axle Yoke-10 Spline, 1.078" Bearing Cap, Aluminum Billet (8 3/4" Axles)
P4510655 Axle Yoke-10 Spline, 1.125" Bearing Cap, Aluminum Billet (8 3/4" Axles)
P4510656 Axle Yoke-10 Spline, 1.078" Bearing Cap, 4130 Chrome Moly Billet (8 3/4" Axles)
P4510657 Axle Yoke-10 Spline, 1.125" Bearing Cap, 4130 Chrome Moly Billet (8 3/4" Axles)
B. Slip Yoke Kits
Slip Yoke Kits for use with driveshaft kits or general service.
P5007409 Slip Yoke Kit-Type 7260 U-Joint, 26 Spline, 6.80" Long (A-904)
P5007410 Slip Yoke Kit-Type 7290 U-Joint, 26 Spline, 7.30" Long (A-904)
P5007411 Slip Yoke Kit-Type 7290 U-Joint, 29 Spline, 8.00" Long (A-727)
C. Universal Joint Packages
U-joint for driveshaft use.
P3690773 Universal U-Bolt Assembly Package-1330 Series
P5007418 Universal Joint Package-Adapts 7260 Drive shaft to 7290 Axle Yoke
D. Axle Yoke Kits
Complete driveshaft pinion yoke kits include yoke, U-joint retaining straps, strap hold-down bolts, yoke retaining washer and nut and instructions.
P4529481AB Axle Yoke Kit-29 Spline, 7260 Joint (8 1/4" and 8 3/4" Axles)
P4529483AB Axle Yoke Kit-29 Spline, 7290 Joint (8 3/4" Axles)
P4876804 Axle Yoke Kit-10 Spline, 7290 Joint (Dana 60 Axles)
E. U-Bolt Yoke Conversion 29 Spline
This kit converts standard strap type assembly to stronger U-bolt assembly on Dana 60 axles with type 7290 U-joints. Allows use of stock prop shaft.
P5007417AC Yoke Kit-Adapts 7290 Yoke to 7260 Driveshaft, 8 3/4" Carrier
F. U-Joint and Prop Shaft Assembly Kit
For custom fabrication of prop shafts. Kit includes the following: Front (7290) yoke and 3 1/4" 16 gauge tube assembly (58.20" in length); U-Joints (2); Balance weights 2 of each (0.26 oz., 0.36 oz., 0.50 oz., 0.75 oz., and 1.00 oz.).
P4876886 Large Yoke U-Joint -7290 Joint (1971-00 8 1/4",196274 8 3/4" and 196274 9 1/4" Axles)
Note: Does not include slip yoke.
A. U-Joint U-Bolt Service Package
Services U-Bolt Conversion Kit. 2 required.
P3690774 U-Joint U-Bolt Service Package (Dana 60 Axles)
B. U-Joint Strap and Bolt Packages
This inexpensive package will help you avoid driveshaft failure and give you peace of mind. Use with Dana 60 Axle Yoke Kit (P4876804).
P4120468 7260 U-Joint Strap and Bolt Package (8 1/4" and 8 3/4" Axles)
P4120469 7290 U-Joint Strap and Bolt Package (8 3/4" and Dana 60 Axles)
REAR AXLE COMPONENTS
C. Aluminum Carrier Housing
This rugged Aluminum Carrier Housing is designed to reduce weight and hold up under high torque. Uses 1 3/4" large stem pinion and standard components. The 8 3/4" aluminum axle housing uses 742 style large stem ring and pinions and fits 8 3/4" banjo housings (up to 1974). It features a weight reduction of 44% (approximately 11 lbs. to 14 lbs.), compared to production cast iron and includes 6061 billet aluminum caps. It is stiffer than cast iron housing; decreases pinion deflection 10%. It uses 742 style bearings and shims, service parts and sure-grips.
P4876445 Aluminum Bare Housing (8 3/4" Axles)
P5007239 Housing Gasket (8 3/4" Axles)
Note: Clearance required on 3.23 or higher ratios. Adjuster lock bolts may need to be replaced with socket head bolts.
D. Ring and Pinion Gears
These high-performance rear end Ring and Pinion Gears are manufactured with a special heat treat process.
P5249928 Rear Axle Ring and Pinion Gears-3.55:1 Ratio, 10-Bolt Cover (8 1/4" Axles)
P5249927 Rear Axle Ring and Pinion Gears-3.55:1 Ratio, 12-Bolt Cover (9 1/4"Axles)
P4529271 Rear Axle Ring and Pinion Gears-3.90:1 Ratio, 10-Bolt Cover (8 1/4" Axles)
P4529272 Rear Axle Ring and Pinion Gears-3.90:1 Ratio, 12-Bolt Cover (9 1/4" Axles)
P4529900 Rear Axle Ring and Pinion Gears-4.10:1 Ratio, 10-Bolt Cover (8 1/4" Axles)
E. NEW! Axle Brace
Axle Brace keeps axle tubes from twisting under extreme loads and provides strength and rigidness to Chrysler 8 3/4" axles. Welding required.
P4510642 Axle Brace (8 3/4" Axles)
F. Differential Clutch Kits
Clutch discs and plates to rebuild a limited slip differential.
P4529484 Differential Clutch Kit (8 3/4" Axles)
P4529485 Differential Clutch Kit (9 3/4" Axles)
This Rear Axle Bearing Set was specifically designed by Mopar Performance to eliminate the production bearing retainers and axle end play adjuster. Set contains two axle shaft bearings, two bearing retainer sleeves, two axle shaft seals and two axle flange gaskets.
P5249444 Rear Axle Bearing Set (1965 and Newer 8 3/4" and 9 3/4"Axles)
B. Crush Sleeves
Original equipment crush sleeves for setting up rear axle. Includes pinion nut washer and pinion flange nut.
P4529700 Crush Sleeve (8 1/4" Axles)
P4529702 Crush Sleeve (9 1/4" Axles)
C. Ring Gear Retaining Bolt Packages
Complete sets of (12) Ring Gear Retaining Bolts with instructions.
P4529486 Right-Hand-Thread Ring Gear Bolt Package (1971on 7 1/4" and 8 3/4" Axles, 1972on 8 1/4" Axles)
P5249163 Left-Hand-Thread Ring Gear Bolt Package (to 1970 7 1/4" and 8 3/4" and to 1971 8 1/4" Axles)
D. Synthetic Gear Lube
Mobil One Synthetic Gear Lube improves wear protection. Engineered to protect your axle in severe duty applications.
P5007326 Mobile 1 Synthetic Gear Lube-75W-140 MS8985
DIFFERENTIAL COMPONENTS
E. Sure-Grip Differential Assemblies
Mopar Performance supplies production replacement Sure-Grip Differential Assemblies for rear axles. These assemblies are complete for high-performance applications. Designed for gear ratios of 2.76:1 and higher.
P4529273 Sure-Grip Differential Assembly (to 1995 8 1/4" Axles)
P4876118 Sure-Grip Differential Assembly (8 3/4" Axles)
F. RWD Chrome Differential Covers
Impress those behind you with one of these Chrome Differential Covers. Attaching bolts not included.
P3690753 RWD Chrome Differential Cover (8 1/4" Axles)
P3690754 RWD Chrome Differential Cover (1973 and Newer 9 1/4" Axles)
P3690755 RWD Chrome Differential Cover (9 3/4" Dana 60 Axles)
G. Rear Axle Cover Chrome Attaching Bolt Sets
Chrome Attaching Bolt packages for chrome rear axle covers.
P4452787 Chrome Attaching Bolts-Set of 12 (7 1/4", 8 1/4", 9 1/4" Axles)
P5249719 Chrome Attaching Bolts-Set of 9 9 3/4" Dana Axles)
